Get Special Discount Offer of NACE-CIP2-001 Certification Exam Sample Questions and Answers
New NACE-CIP2-001 Dumps For Preparing CIP Level 2 Certified NACE Exam Well
NACE-CIP2-001 exam covers a broad range of topics related to coatings, including surface preparation, application techniques, inspection procedures, and safety considerations. Candidates who pass the exam will demonstrate their ability to evaluate coating systems and identify potential problems that could compromise the integrity of the structure or equipment being protected.
NACE NACE-CIP2-001 is an internationally recognized exam that is designed for coating inspectors who have a good understanding of coating materials, surface preparation, and application techniques. NACE-CIP2-001 exam is intended to evaluate the coating inspector's understanding of the coating inspection process, the ability to identify coating defects, and the ability to interpret coating specifications. Coating Inspector Level 2 certification is recognized in the industry as a standard for coating inspectors, and it is highly sought after by companies that require coatings inspections.
NEW QUESTION # 14
Inspection and Test plans are developed by referencing:
- A. The Specification, SDS, relevant Standards and Codes
- B. The Specification, Safety Manual, Relevant Standards and Codes
- C. The Specification, Application Guidelines, 'Relevant Standards and Codes
- D. The Specification, TDS, relevant Standards and Codes
Answer: D
NEW QUESTION # 15
External coatings applied to buried pipelines are generally tested for:
- A. Chalking resistance
- B. Gloss level
- C. Solvent resistance
- D. Cathodic disbondment
Answer: D
NEW QUESTION # 16
Pre-cleaning of work pieces will NOT remove
- A. oil or grease.
- B. mill scale.
- C. snow, ice or water.
- D. dirt.
Answer: B
NEW QUESTION # 17
You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?
- A. SP 1 followed by caustic etching
- B. SP 1 followed by SP 3
- C. SP 1 followed by acid etching
- D. SP 1 followed by SP 2
Answer: D
NEW QUESTION # 18
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. reduce the possibility of missing the recoat window.
- C. allow the contractor to guarantee the completion date.
- D. avoid repetitive blasting/coating operations.
Answer: A
NEW QUESTION # 19
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. urethanes.
- B. inorganic zincs.
- C. epoxies.
- D. powder coatings.
Answer: B
NEW QUESTION # 20
Cold-applied tape
- A. is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.
- B. is typically green or led and looks like "painted" finish.
- C. are identifiable by its distinct colors, usually light blue, green, Or Grey.
- D. have a cross-linked polyethylene backing and a heat-activated adhesive.
Answer: A
NEW QUESTION # 21
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Eddy Current Gauge
- B. Magnetic Gauge
- C. Ultra Sonic DFT Gauge
- D. Tooke Gauge
Answer: D
NEW QUESTION # 22
When observing design defects the NACE Inspector should:
- A. Document the defect and the potential problems that could result
- B. Ignore the defect as the inspector can't change the design
- C. Request that the item be rebuilt with a better design for coating
- D. Stop the job immediately
Answer: A
NEW QUESTION # 23
The most likely area of failure on a buried external pipeline coating is the:
- A. Ground bed
- B. Mainline coating
- C. Field joint coating
- D. Areas exposed to Ultra Violet light
Answer: C
NEW QUESTION # 24
When ASIN D 3363 is specified the Inspector must:
- A. Record the two end points identified in the standard
- B. Record the percentage of failure
- C. Record the highest value attained
- D. Use the correct solvent
Answer: A
NEW QUESTION # 25
Inspection and Test Plans are provided to:
- A. Outline the inspection steps, sequencing and pass/fail criteria
- B. So the Inspector doesn't have to read the entire specification
- C. So the contractor has a single document to reference
- D. To supersede the requirements of the product data sheets
Answer: A
NEW QUESTION # 26
Dehumidification is defined as the removal of moisture vapor from the air to
- A. raise its relative humidity.
- B. provide worker comfort.
- C. lower its temperature
- D. lower its dew point,
Answer: D
NEW QUESTION # 27
Application of Thermal Spray Coatings requires:
- A. The same skills as liquid coatings
- B. No particular skills
- C. The same skills as welding
- D. Specialized skills supported by training and experience
Answer: D
NEW QUESTION # 28
In the event of a conflict between the Product Data Sheet and the Specification:
- A. The Product Data Sheet prevails
- B. The Specification prevails
- C. It is up to the Applicator to decide which one to follow
- D. It is up to the Inspector to decide which one to follow
Answer: B
NEW QUESTION # 29
When observing fabrication defects the NACE Inspector should:
- A. Write an NCR and call the fabricator
- B. Require they be corrected prior to coating
- C. Consult the specification to determine how they should be treated
- D. Stop the job immediately
Answer: C
NEW QUESTION # 30
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. False
- B. True
Answer: B
NEW QUESTION # 31
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Consensus
- B. Mandatory
- C. De facto
- D. Voluntary
Answer: D
NEW QUESTION # 32
Which is used to calibrate a pH meter?
- A. Standard buffer solution
- B. Distilled water
- C. Standard solvent solution
- D. Deionized water
Answer: A
NEW QUESTION # 33
......
Updated NACE-CIP2-001 Dumps Questions Are Available For Passing NACE Exam: https://braindumps.exam4tests.com/NACE-CIP2-001-pdf-braindumps.html