[2023] NSE7_SDW-7.0 Answers NSE7_SDW-7.0 Free Demo Are Based On The Real Exam
NSE7_SDW-7.0 [Jul-2023 Newly Released] Exam Questions For You To Pass
Fortinet NSE7_SDW-7.0 certification is highly respected in the IT industry and is recognized by many organizations around the world. Fortinet NSE 7 - SD-WAN 7.0 certification demonstrates that the holder has the skills and knowledge to design, implement and manage complex SD-WAN solutions. With the increasing demand for SD-WAN solutions, the Fortinet NSE7_SDW-7.0 certification is becoming increasingly popular among IT professionals who want to enhance their career prospects.
Fortinet NSE7_SDW-7.0 (Fortinet NSE 7 - SD-WAN 7.0) certification exam is an essential credential for security professionals who specialize in SD-WAN security. Fortinet NSE 7 - SD-WAN 7.0 certification validates the candidate's expertise in Fortinet's SD-WAN solution and demonstrates their ability to ensure the security and reliability of an organization's SD-WAN infrastructure. With the increasing adoption of SD-WAN by organizations worldwide, the demand for certified SD-WAN security professionals is likely to increase, making the Fortinet NSE 7 - SD-WAN 7.0 certification a valuable asset for security professionals.
NEW QUESTION # 15
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- B. Firewall policy ID 1 has source NAT disabled.
- C. Changes have been made on firewall policy ID 1 on FortiGate.
- D. FortiGate has terminated the session after a change on policy ID 1.
Answer: C
NEW QUESTION # 16
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?
- A. diagnose vpn tunnel list
- B. get ipsec tunnel list
- C. get router info routing-table all
- D. diagnose debug application ike
Answer: D
NEW QUESTION # 17
Which two performance SLA protocols enable you to verify that the server response contains a specific value?
(Choose two.)
- A. twamp
- B. icmp
- C. dns
- D. http
Answer: C,D
NEW QUESTION # 18
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It supports normalized interfaces for SD-WAN member configuration.
- B. It uses templates to configure SD-WAN on managed devices.
- C. The objects are saved in the ADOM common object database.
- D. It does not support meta fields.
Answer: B,C
Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
NEW QUESTION # 19
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN member status, the routing table, and the performance SLA status.
If port2 is detected dead by FortiGate, what is the expected behavior?
- A. Host 8.8.8.8 is reachable through port1 and port2.
- B. The administrator manually restores the static routes for port2, if port2 becomes alive.
- C. FortiGate removes all static routes for port2.
- D. Port2 becomes alive after three successful probes are detected.
Answer: C
Explanation:
Explanation
This is due to Update static route is enable which removes the static route entry referencing the interface if the interface is dead
NEW QUESTION # 20 
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 and port2 are not administratively down.
- B. port1 is assigned a manual IP address.
- C. port2 is referenced in a static route.
- D. port1 is referenced in a firewall policy.
Answer: D
NEW QUESTION # 21
Refer to the exhibit.
Based on the exhibit, which two actions does FortiGate perform on sessions after a firewall policy change?
(Choose two.)
- A. FortiGate does not change existing sessions.
- B. FortiGate evaluates new sessions.
- C. FortiGate flushes all sessions.
- D. FortiGate terminates the old sessions.
Answer: A,B
Explanation:
Explanation
FortiGate not to flag existing impacted session as dirty by setting firewall-session-dirty to check new. The results is that FortiGate evaluates only new session against the new firewall policy.
NEW QUESTION # 22
Exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- B. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
- C. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- D. The packet size exceeded the outgoing interface MTU.
Answer: A
NEW QUESTION # 23
Which components make up the secure SD-WAN solution?
- A. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- B. Datacenter, branch offices, and public cloud
- C. Application, antivirus, and URL, and SSL inspection
- D. Telephone, ISDN, and telecom network.
Answer: A
NEW QUESTION # 24
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferredmember in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Disable allow-subnet-overlap under config system settings.
- B. Disable tp-session-without-syn under config system settings.
- C. Enable auxiliary-session under config system settings.
- D. Enable snat-route-change under config system global.
Answer: C
Explanation:
Explanation
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-
NEW QUESTION # 25
Which two settings can you configure to speed up routing convergence in BGP? (Choose two.)
- A. update-source
- B. link-down-failover
- C. set-route-tag
- D. holdtime-timer
Answer: B,D
NEW QUESTION # 26
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
- A. diagnose sys sdwan health-check
- B. diagnose sys sdwan sla-log
- C. diagnose sys sdwan intf-sla-log
- D. diagnose sys sdwan log
Answer: B
NEW QUESTION # 27
Which two protocols in the IPsec suite are most used for authentication and encryption? (Choose two.)
- A. Secure Shell (SSH)
- B. Security Association (SA)
- C. Internet Key Exchange (IKE)
- D. Encapsulating Security Payload (ESP)
Answer: C,D
NEW QUESTION # 28
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process?
(Choose two.)
- A. A factory reset performed on FortiGate.
- B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- C. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- D. The zero-touch provisioning process has completed internally, behind FortiGate.
- E. The FortiGate cloud key has not been added to the FortiGate cloud portal.
Answer: D,E
NEW QUESTION # 29
......
Fortinet NSE7_SDW-7.0 Certification Exam is a professional-level certification that validates the knowledge and skills of candidates to effectively design, deploy, and maintain secure SD-WAN solutions. Fortinet NSE 7 - SD-WAN 7.0 certification exam is designed for experienced network professionals who have expertise in deploying and managing Fortinet SD-WAN solutions.
New 2023 Realistic Free Fortinet NSE7_SDW-7.0 Exam Dump Questions and Answer: https://braindumps.exam4tests.com/NSE7_SDW-7.0-pdf-braindumps.html